As fall temperatures drop, commercial properties prepare their landscapes for winter. Landscapers swap out seasonal flowers, adjust irrigation schedules, and complete final maintenance before winter weather arrives.
Though landscapers are busy prepping plants for winter, they must not forget the planter itself. Often overlooked as a piece that can stay outdoors through the winter months, unless it’s made of durable material with finishes and insulation, it likely can’t withstand winter’s harsh weather conditions.
PolyMade planters are different; they’re insulated with a three-layer construction and durable finishes, designed to remain outdoors year-round, helping protect both the planter and the plants inside as the seasons change.
Continue reading to learn how to prepare your commercial planters for winter, and why the right planter can make the transition much easier.
Why Winter Maintenance is Crucial for Commercial Planters
Winter is demanding on commercial properties, especially if you’re in a region that experiences winter precipitation and freezing temperatures. Between snow, ice, heavy rain, and temperature fluctuations, outdoor planters are constantly exposed to environmental stress.
For planters made from traditional materials—like concrete planters—this stress creates some potential problems, including, but not limited to the following:
Trapped water inside the planter can freeze and expand
Repeated freeze-thaw cycles cause the planter to crack
UV exposure fades the planter’s finish, even in winter
Cold temperatures put plant roots under additional stress
Luckily, fall maintenance can protect your landscaping investment while preparing plants for the chilly months ahead.
Commercial Planter Fall Maintenance Tips to Prepare for Winter
Your commercial planter is an investment, and you want it to look great for years to come, and expect it to complement your property’s aesthetic. Unfortunately, cracked and poorly maintained planters can do the opposite. Below are some fall maintenance tips to prepare for winter:
Disconnect Irrigation Lines
One of the most important fall maintenance tips is to disconnect irrigation lines before temperatures start dropping below freezing. If water remains in the irrigation system, the lines can freeze, expand, and break the irrigation components and connections.
If your commercial planter has an irrigation system, start by turning off the irrigation supply. Next, drain any remaining water and disconnect connections where appropriate. Finally, inspect irrigation access points before winter weather arrives.
Don’t Forget about Drainage
Drainage is one of the most important parts of any commercial planter. Drainage remains important year-round, so start by removing any leaves and debris that have collected inside the planter. Next, check that all drainage openings are clear and free of blockages. Finally, test that water can move properly through the planter to avoid unnecessary moisture buildup.
Move Your Traditional Planter Indoors
Traditional planters should remain indoors during winter for several reasons. First, depending on the planter material, it’s more vulnerable to cracking from exposure to frigid temperatures and winter precipitation. Next, some materials like concrete planters absorb moisture, freeze, expand, and damage the planter. Some planter materials can also get brittle when exposed to frigid temperatures—or UV exposure—which weakens the material and causes permanent damage.
Whether you have a concrete, fiberglass, plastic, or wooden commercial planter, move it inside to protect it from harsh winter weather. However, you’ll likely need to rent expensive equipment to move large, heavy commercial planters, as they’re difficult to move around a commercial property.
Why PolyMade Planters Stay Outside Year-Round
PolyMade planters are a better alternative for planters that need to endure extreme temperatures; you never have to move your PolyMade commercial planters indoors each winter. Our planters are designed to handle changing weather, including harsh winters. Below are just some of the many reasons why PolyMade planters can stay outside year-round:
Temperature Stability
Seasonal temperature swings affect commercial landscapes. From freezing winter nights to intense summer heat, outdoor planters must withstand changing conditions while providing a stable environment for plant roots. Insulation should be an important consideration when selecting commercial planters.
Features such as layered construction, insulated cores, and effective drainage help reduce temperature stress around roots and manage excess moisture. Together, these design elements included in every PolyMade planter protect plants from harsh conditions, including below-freezing temperatures and temperature fluctuations.
Durable Construction
Another great feature of PolyMade planters is durable construction. Planters available at big-box stores lack durability, are fragile, and need to be replaced frequently. Concrete planters, fiberglass planters, and plastic planters often crack and warp under pressure from repeated freeze-thaw cycles and poor construction.
Investing in a PolyMade commercial planter means choosing a product designed to maintain its appearance and structural integrity over time. Our three-layer construction includes a high-density polystyrene for an insulated core, polyurea for sturdiness, and a synthetic stucco.
Durable Finishes
PolyMade commercial planters include finishes that never rust, rot, or crack, making them perfect for any commercial outdoor application. From traditional granite finishes to hand-sprayed high-end acrylic, or Dryvit™ synthetic stucco, each finish allows our pieces to flex during freeze-thaw cycles without cracking.
Our planters withstand severe weather, including extreme temperatures, strong winds, and fluctuating temperatures. They’re lightweight, weighing a fraction of concrete planters, and easier to place and rearrange throughout your property, including rooftops. They’re engineered with three layers that help with thermal stability and prevent cracking and leaching. They’re fully customizable with many additional features like casters, irrigation lines, access panels, forklift channels, and more.
Let’s Build Your Planter Today
Looking for large commercial planters designed around your property? Consider PolyMade’s custom commercial planters. Our planters are custom-made to support plant health, offer custom shapes, allow lightweight installation, are weatherproof, and offer a lower lifetime cost compared to alternatives.
Ready to add a stunning commercial planter that’s engineered to support plant health and protect your investment? Contact our team for more information about our lightweight, custom commercial planters.

